Primusinks Bond GT-70NY

Bond GT-70NY, the strongest and durable adhesive, is formulated with thermoplastic polyurethane resin compound with high strength of polyamide thermal powder to achieve the highest washing durability performance as a ?HEAT TRANSFER ADHESIVE.

ONE GLUE FOR ALL, designed for foil paper, flock paper and flock dusts. Moreover, its unique characteristic and break-through technology can be applied for both manual and automatic printing machine. Slow drying property gives adequate time range to run continuously without screen clogged from the hot plate.

Specialty:

• Slow drying.
• Superb durable washing fastness.
• PVC, Phthalates, APEO, Azo, Formaldehyde and Lead Free formulations.
• Meets all key international environmental standards.
• High washing fastness @40C x 5 cycles tumble dry laundry machine.

Guidance:

• Choose screen mesh around 80-120 t/in count (31-47 t/cm). For sharp angle, 120t/in is recommended.
• Print Bond GT-70NY directly onto fabric, dry each print before next coat.
• For Foil and Flock Paper –
  Print at least 2-3 coats of the glue to ensure ink deposit is enough and dry properly before heat press process.
• For Flock Dust-
  Print 1^st?coat and dry first to ensure a firm foundation. Dry properly, then print 2^nd?coat at the same time go for static flocking process thoroughly.
• The ink must be thick enough to achieve a good bonding effect.
• Press parameter: 140-160? (284-320?) x 15 seconds x 3-4 bar

• Keep the screen in the flooded position while print stops. Or, go for screen wash during a temporary stop.
• If drying is not properly or thoroughly, it might result in incomplete foil or flock paper transfer.
• Do not keep printed swatch overnight, without press, paste would be self-linked from time to time.
• Containers must maintain air tight seal while not in use.
• Screen must be prepared with water-resist emulsion to prevent stencil breakdown.
• Any application not referred in this Product Information should be pre-tested or consulted with Primus Technical Service prior to print.

Printing Parameters:

	100% Cotton/Poly Cotton/Blended		150-160? ? 15 seconds x 6 kg
	Durometer: 60-70 Edge: Rounded or Sharp		80-120 t/in (31-47 t/cm)
	None		5-40? Use within one year of receipt. Avoid exposing under direct sunlight. Keep drums sealed tight at all times.
	Tap water		Available upon request (MSDS)