Description
Details:
Ready-for-use Phthalates-Free Plastisol Colors and Direct Super White have excellent opacity and elongation characteristics. They are easy to run on automatic machines and have a quick flash property to enhance maximum productivity. The PF series provides all-around fastness for all kinds of substrates, natural and synthetic fabrics. There are 20 colors in the PF-Standard Color Series.
Specialty:
- Excellent all-around durable fastness.
- Print through a fine mesh, print-flash-print or wet-on-wet process.
- Soft finish prints and glossy effects.
- High resistance to bleeding.
- No harmful or distracting odors in the workplace.
Guidance:
- This can be used straight from the drum. Well, stirring before applying is very important.
- Multiple strokes may be required when printing by hand. To yield a high deposit, the use of rounded squeegees or other techniques is recommended when printing on automatics.
- Plastisol Ultimate Polar White is a premium Flash White for the purpose of under-base printing on dark ground that can provide the best coverage and is helpful for sequence color printing it.
- Viscosity can be reduced by adding different percentages of Plastisol 700 Reducer to meet the client’s intended viscosity and gel or curing will not be affected.
- Plastisol 710 Softener can be mixed 10% max by weight to create a superior soft hand touch. Overdosing may cause difficulty in drying or curing.
Precautions:
- All the above printing guides are required to adjust the off-contact distance, squeegee pressure, and blade speed to meet up intended performance, best coverage, and brightest print.
- DO NOT add or mix phthalate ink with PLAST PF Inks.
- Avoid excessive over-flashing, as it can result in poor inter-coat adhesion of overprint colors.
- Any emulsion is compatible with Plastisol inks.
- Failure to cure ink properly can result in poor wash fastness, inferior adhesion, and unacceptable durability.
- Do not dry clean, bleach, or iron printed area.
- Containers must maintain a seal while not in use.
- On some types of fabric, dye migration may occur. Hence, fabric pre-testing is necessary before bulk production.
- Any application not referred to in this Product Information should be pre-tested or consulted with Primus Technical Service prior to print.
Printing Parameters:
 | 100% Cotton/Poly Cotton/Athletic wear/ Synthetic fabrics |  | Gel: 120-140℃(229℉) x 4-6 seconds Cure: 150-160℃(319-355℉) ×3 minutes |
 | Durometer: 70-80 Edge: Rounded or Sharp |  | 40-305t/in (16-120t/cm) |
 | Additive 700 Reducer 10-20% by weight Additive 710 Softener max. 10% by weight |  | 18-40℃(65-90℉) Use within one year of receipt. Avoid exposure under direct sunlight. Keep drums sealed tight at all times. |
 | Additive Screen Cleaner P3 |  | Available upon request (MSDS) |
