Description
Details:
CDT and CDW are ready water base inks developed to produce excellent cotton discharge results. CDT is a base clear to be mixed with pigments and also a standalone clear discharge; CDW is a base white that gives premium white discharge while applied on a 100% basis. CDW(EX) is an extra special formulated extreme whiteness.
Specialty:
- Can be run on both manual and automatic presses.
- Super Soft finish with good color yield using water-based pigment.
- PVC, Phthalates, APEO, Azo, Formaldehyde and Lead-Free formulations.Meets all key international environmental standards.
- Superb discharge on 100% dischargeable cotton substrate.
Guidance:
- Use 100 t/in mesh (39 t/cm) for a large coverage area and use 150-180 t/in mesh (61-71t/cm) for detailed images.
- Stir pigment first, then mix with Discharge Activator 3-5% by weight. Why constantly stir a ready-mixed formula? Allow it to rest for 5 minutes before use.
- To avoid spoilage of mixed base, only mix quantity which can be consumed in a 4-hour period.
- Patch prints are required to get the surface dried before the next color print. Final curing is important to achieve an entire color yield.
- Suitable wet-on-wet printing application.
Precautions:
- Do not leave your inks sitting in the screen for a long time, as it will dry out.
- To avoid spoilage of mixed base, only mix quantity which can be consumed in a 4-hour period.
- Textile printed with Discharge Activator should either be washed before packaging or labeled accordingly to alert the buyer of the presence of Formaldehyde on garments. To meet Baby Safety Standard, formaldehyde below 25ppm, discharged garment is strongly suggested to go washing before delivery.
- Insufficient curing time and temperature may result in poor or unpredictable discharging of fabric dyes.
- Warning: Always pre-test the dischargeability of your garments by printing a small swatch on the inside of garments.
- Containers must maintain air. Tight seal while not in use.
- The screen must be prepared with water-resist emulsion to prevent stencil breakdown.
- Any application not referred to in this Product Information should be pre-tested or consulted with Primus Technical Service prior to print.
Printing Parameters:
?
 | 100% Dischargeable Cotton |  | 160? ? 3 minutes |
 | Durometer: 60-70 Edge: Rounded or Sharp |  | 100-200t/in(39-79t/cm) |
 | 3-5% Discharge Activator by weight |  | 5-40? Use within one year of receipt. Avoid exposing under direct sunlight. Keep drums sealed tight at all times. |
 | Tap water |  | Available upon request (MSDS) |
Reviews
There are no reviews yet.